P0650VGF1MA01 Tianma 6.5 Inch 640x480 VGA TFT LCD 1200cd/m² Wide Temperature RGB 40 Pin Module
1200cd/m² sunlight readable display
,wide temperature 6.5 inch TFT LCD
,parallel RGB 40 pin LCM
The P0650VGF1MA01 from Tianma is a 6.5 inch a-Si TFT-LCD module built for equipment that has to stay readable in direct sunlight and keep working through extreme climate swings. With a 1200 cd/m² typical brightness, a 640 x 480 VGA pixel array and a wide operating window of -30°C to +80°C, this panel is a drop-in display solution for outdoor kiosks, vehicle dashboards, charging stations and ruggedised handheld terminals where ordinary consumer panels wash out or shut down. The module is supplied as a complete LCM with an integrated T-CON, a parallel RGB 8-bit single channel interface and a 40 pin I-PEX connector, so engineering teams can move from prototype to pilot production without redesigning the host board.
Optically the panel delivers a 800:1 contrast ratio, a 16.7M colour depth driven at true 8-bit per channel, and wide colour coverage of 98% sRGB, 70% NTSC. Greyscale transitions settle in around 30 ms, which keeps menu scrolling and gauge needle movement clean, while the 60 Hz refresh with 180 degree scan reversal support covers portrait and landscape mounting conventions. A matte anti-glare surface treatment removes specular reflections from windscreens and industrial lighting, and the symmetrical 85/85/85/85 viewing cone means the picture stays stable whether the operator stands directly in front of the machine or reads it from an angle on a production floor.
Mechanically the module measures 154 x 121 mm with a 7.1 mm typical thickness, and the active area of 132.48 x 99.36 mm sits inside a 135.5 x 102.4 mm viewing aperture. Front and side mounting holes are provided so the panel can be fastened either behind a bezel cut-out or onto a chassis bracket, and the die-cast aluminium rear frame spreads heat away from the LED bar during long shifts. Power consumption stays modest at roughly 396 mW for the logic rail plus about 3.6 W for the backlight, which matters for battery-backed and solar-assisted installations.
Key Features- 1200 cd/m² sunlight readable brightness: the typical luminance level keeps characters and graphics legible under direct outdoor light without extra optical bonding.
- Wide temperature operation: full performance from -30°C to +80°C operating and -40°C to +90°C storage covers cold-chain, desert and engine-bay installations.
- True 8-bit colour pipeline: 16.7M colours over 98% sRGB and 72% NTSC preserve medical imaging, mapping and HMI colour coding without banding.
- Parallel RGB 8-bit interface: a single channel 24-bit RGB bus with a standard 40 pin I-PEX 20593-040E-01 connector keeps host board design simple.
- 100,000 hour WLED backlight: a 6S2P side-entry LED bar with integrated driver delivers long service life and stable brightness over the product lifetime.
- Rugged optical stack: matte anti-glare front surface, 800:1 contrast and 85/85/85/85 viewing symmetry suit bezel-mounted industrial enclosures.
| Parameter | Specification |
|---|---|
| Panel Brand / Model | Tianma / P0650VGF1MA01 (Tianma TM065QDGP01-00 equivalent) |
| Display Size | 6.5 inch diagonal, 4:3 aspect ratio |
| Panel Type | a-Si TFT-LCD, LCM, transmissive, normally black |
| Resolution | 640 (RGB) x 480, VGA, 122 PPI |
| Active Area | 132.48 (H) x 99.36 (V) mm |
| Module Outline | 154 (H) x 121 (V) x 7.1 mm (typ.) / 11 mm (max.) |
| Brightness | 1200 cd/m² (Typ.) |
| Contrast Ratio | 800:1 (Typ.), transmissive mode |
| Viewing Angle | 85/85/85/85 (Typ.) (CR≥10) |
| Display Colours | 16.7M, 8-bit, 98% sRGB / 72% NTSC |
| Response Time | 30 ms (Typ.) (Tr+Td) |
| Signal Interface | Parallel RGB 8-bit single channel, 40 pins, I-PEX 20593-040E-01 |
| Backlight | WLED 6S2P side entry, 100,000 hours, with LED driver |
| Power Consumption | Logic 3.3 V / 120 mA, backlight 16.2 to 19.8 V / 100 mA |
| Surface Treatment | Matte, anti-glare, RoHS compliant |
| Operating Temperature | -30°C to +80°C |
| Storage Temperature | -40°C to +90°C |
This 6.5 inch VGA module is aimed at equipment builders who cannot compromise on visibility. Typical installations include outdoor payment and ticketing kiosks, electric vehicle charging posts, agricultural and construction machinery dashboards, marine navigation repeaters, portable spectrometry and test instruments, and shop-floor HMI terminals exposed to coolant mist and machine lighting. Because the panel accepts a plain RGB bus and runs from a 3.3 V logic rail, it also fits legacy control boards that are being refreshed from older CCFL-based displays, and the 640 x 480 resolution maps cleanly onto existing HMI layouts without rescaling work.
Packaging & Quality AssuranceEach module ships in an anti-static bag inside a shock absorbing foam tray, with panels stacked in export rated corrugated cartons that carry the model, batch and date code. Every shipment is checked for luminance uniformity, dead pixels, flicker and connector integrity before packing, and units are backed by a twelve month warranty covering workmanship and backlight failure under normal operating conditions. Custom options including touch integration, optical bonding, AR or AG cover glass and matching driver boards can be quoted on request, and small trial quantities are accepted so that design teams can validate the panel inside the final enclosure.