제품 세부 정보

Created with Pixso. Created with Pixso. 상품 Created with Pixso.
라운드 LCD 디스플레이
Created with Pixso.

1.45-inch round screen SPI/MIPI/QSPI interface 412*412 resolution TFT LCD display module

1.45-inch round screen SPI/MIPI/QSPI interface 412*412 resolution TFT LCD display module

브랜드 이름: WANSHUJIE
MOQ: 100개
가격: $10/pieces 1-99 pieces
지불 조건: L/C, D/A, D/P, T/T, 서부 동맹,
상세 정보
원래 장소:
중국
제품 설명
1 General Specifications
No. Item Specification Remark
1 LCD Size 1.45 inch (Diagonal)  
2 Driver Element a-Si TFT active matrix  
3 Resolution 412 (RGB) ×412  
4 Display Mode Normally Black, Transmissive  
5 Pixel Pitch 0.0299 (H) × 0.0897(V)  
6 Display Colors 262k  
7 Surface Treatment --  
8 Color Arrangement RGB-Stripe  
9 Interface 4-line SPI/MI PI/QSPI  
10 Viewing Direction ALL  
11 Gray Scale Inversion Direction -- Note 1
12 Outline Dimension (mm) 39.36(W) ×41.53 (H) ×1.66(T)  
13 Active Area (mm) 36.96 (W) ×36.96 (H)  
14 Touch Screen Without Cover LENS  
15 Display Driver IC SPD2010  
16 Touch Driver IC Incell driver IC SPD2010  
Note 1: Viewing direction for best image quality is different from TFT definition. There is a 180°shift.

Note 2: RoHS compliant.
2 Pin Assignment
2.1 LCD Pin assignment
Match connector: FH26-31S-0.3SHW (Hirose) or equivalent.
PIN Symbol I/O Description Remark  
1 GND P Ground    
2 D0P I/O MI PI DSI-D0+ data signals    
3 D0N I/O MI PI DSI-D0- data signals    
4 GND P Ground    
5 DCKP I MI PI DSI-CLK+ clock signals    
6 DCKN I MI PI DSI-CLK- clock signals    
7 GND P Ground    
8 QSPI D2 I QSPI data signal    
9 QSPI D1 I QSPI data signal    
10 D/QSPI D0 I D/QSPI data signal    
11 GND P Power Ground    
12 SCL I SPI clock signal.    
13 SDA I/O SPI data signal    
14 RESET I System reset pin,Signal is active low.    
15 GND P Power Ground    
16 TP-RESET I Reset signal for touch circuit.    
17 TP-INT I Interrupt signal for touch circuit.    
18 IM 1 I Interface selection. Note1  
19 IM0 I Interface selection. Note1  
20 GND P Power Ground    
21 PNSWAP I PNSWAP polarity swap of MI PI signal    
22 TEST-I(2) I This pin is used as D/CX (data/ command
selection) in SPI Interface .
   
23 TP-SCL I TP_I2C _SCL(3.3V), 4.7K~10K pull up resistor
needed
   
24 TP-SDA I/O TP_I2C_SDA (3.3V),4.7K~10K pull up resistor
needed
   
25 GND P Power Ground    
26 IOVCC P Power Supply for logic I/O 3.3V    
27 VCI P Power Supply for analog circuit 3.3V    
28 GND P Power Ground    
29 LEDA P LED anode    
30 LEDK P LED Cathode    
31 LEDK P LED Cathode    

 

1.45-inch round screen SPI/MIPI/QSPI interface 412*412 resolution TFT LCD display module 0