TM057QDHG10 Tianma 5.7 Inch 640x480 VGA High Brightness TFT LCD Module 1000 cd/m² TTL Interface
5.7 inch VGA high brightness LCD
,TTL interface industrial TFT module
,1000 nit wide temperature display
The TM057QDHG10 from Tianma is a 5.7 inch VGA transmissive TFT-LCD module that combines a 1000 cd/m² high brightness backlight with a wide temperature build, making it one of the practical choices for handheld instruments, vehicle terminals and outdoor control boxes that must remain readable in daylight. The 640 x 480 pixel array at a 4:3 aspect ratio matches the classic 5.7 inch industrial footprint, so the panel drops into existing front bezels and mounting bosses without mechanical redesign, and the 115.2 x 86.4 mm active area keeps the same viewing geometry that equipment designers have used for years.
The optical set is tuned for contrast and punch rather than colour gamut breadth: an 800:1 typical contrast ratio, a 262K colour depth and a directional viewing window of 70/70/70/60 degrees are exactly what machine operators need when reading numeric readouts, bar graphs and status icons at arm's length. Because the cell is a TN normally white transmissive type, response is quick and the display holds up well in cold start conditions, while the matte hard coated front polariser suppresses reflections from workshop lighting and sunlight. Signal entry is a TTL RGB parallel interface, which is friendly to low cost MCU and industrial ARM platforms that do not carry an LVDS or eDP transmitter.
The backlight is a white LED edge system rated for 50,000 hours and provided with an integrated LED driver, so the host only needs to supply a clean DC rail. 180 degree scan reversal is supported, letting the same module be mounted upright or inverted in the enclosure, and image flip in both axes is available for optical path designs that use a mirror. With a wide temperature rating, resistance to vibration and a panel construction that tolerates repeated thermal cycling, the TM057QDHG10 is aimed squarely at long life industrial equipment rather than short cycle consumer products.
Key Features- 1000 cd/m² high brightness: daylight readable output removes the need for a sunshade on outdoor terminals and vehicle cabs.
- 5.7 inch VGA 4:3 footprint: 640 x 480 pixels at 115.2 x 86.4 mm active area matches classic industrial bezel openings.
- Wide temperature build: operating range from -30°C to +80°C with -30°C to +80°C storage covers cold store and engine bay duty.
- TTL RGB parallel interface: direct connection to low cost MCU and ARM host boards without an LVDS or eDP bridge.
- 50,000 hour WLED with driver: integrated LED driver simplifies the power design and stabilises brightness over the product life.
- Rugged optical surface: matte hard coating 3H, 800:1 contrast and 262K colours for clear numeric and graphic readouts.
| Parameter | Specification |
|---|---|
| Panel Brand / Model | Tianma / TM057QDHG10-00 |
| Display Size | 5.7 inch diagonal, 4:3 aspect ratio |
| Panel Type | a-Si TFT-LCD, LCM, TN, normally white, transmissive |
| Resolution | 640 (RGB) x 480, VGA |
| Active Area | 115.2 (H) x 86.4 (V) mm |
| Brightness | 1000 cd/m² (Typ.) |
| Contrast Ratio | 800:1 (Typ.), transmissive |
| Viewing Angle | 70/70/70/60 (Typ.) (CR≥10) |
| Display Colours | 262K |
| Signal Interface | TTL RGB parallel, FPC connector |
| Backlight | WLED edge type, 50,000 hours, with LED driver |
| Power Supply | 3.3 V (Typ.) logic rail |
| Surface Treatment | Matte, hard coating 3H |
| Scan Direction | 180° reversal supported, image flip in both axes |
| Operating Temperature | -30°C to +80°C |
| Storage Temperature | -30°C to +80°C |
This module suits instrumentation and control equipment where the screen is read in ambient light: portable analysers and gas detectors, industrial weighing terminals, CNC hand wheels and machine pendants, agricultural and forklift dashboards, marine instrument repeaters, parking and access control terminals, medical pumps and patient monitors. Its 5.7 inch diagonal and VGA resolution are also a good match for retrofit programmes replacing older monochrome or CCFL backlit modules, because the mounting pattern and signal format remain familiar to maintenance teams and the higher brightness immediately improves readability on the shop floor.
Packaging & Quality AssurancePanels are individually sealed in anti-static bags, seated in moulded foam trays and shipped in export grade cartons marked with model, quantity and production batch. Each lot is inspected for luminance uniformity, pixel defects, flicker and interface continuity before dispatch, and every unit is covered by a twelve month warranty against manufacturing defects and premature backlight failure. Touch screen bonding, custom FPC length, anti-reflective cover glass and matched driver boards can be supplied on request, and small sample orders are welcome so that integrators can confirm fit, brightness and viewing behaviour inside the finished enclosure.